GTM-43001130505 Image Model Image Information Model Number GTM-43001130505 Description GTM-43001130505, ICT / ITE / Medical Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, , Output Rating: 18 Watts, Power rating with convection cooling (W) , 4-48V in 0.1V increments, Approvals: Agency Documents CE EC-Declaration for Medical Contact GlobTek for more information CE EC-Declaration for Industrial/Commercial/ITE Contact GlobTek for more information CE EC-Declaration for Household Contact GlobTek for more information UKCA-Declaration for Medical Contact GlobTek for more information UKCA-Declaration for Industrial/Commercial/ITE Contact GlobTek for more information UKCA-Declaration for Household Contact GlobTek for more information Morocco SDoC Declaration https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0O3a00000NKQAeEAP RoHS/RoHS3 Declaration https://www.globtek.com/pdf/rohs_cert/a0O3a00000NKQAeEAP Prop 65 Statement https://en.globtek.com/prop-65-statement.pdf REACH Declaration https://www.globtek.com/pdf/iso_certificates/REACH.pdf Conflict Minerals Declaration https://www.globtek.com/pdf/conflict-minerals.pdf Model Parameters Type Wall Plug-in Technology Regulated Switchmode AC-DC Power Supply AC Adaptor Category ICT / ITE / Medical Power Supply Input Voltage Range (V) 100-240V~, 50-60 Hz Max Input Current (A) 0.6 A Max Output Power Rating (W) 18 Output Voltage Range (V) 4-48 Efficiency USA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782 Ingress Protection NA Size (mm) 70*61*30 Enclosure Rating Table Preferred ratings shown below. Custom output voltages available in 0.1V increment from the minimum voltage listed to the maximum voltage listed; contact sales.
Model Number (Final ordering #/Part No to be defined) Voltage Amps (A) Watts (W) RFQ GTM-43001130505* 4.5 2.2 9.9 RFQ GTM-43001130505-XXXX CUSTOM CUSTOM CUSTOM RFQ
* (Final ordering #/Part No to be defined)
Input Voltage: Specified: 90-264VAC, Nameplate: 100-240VAC 100% rated load current for 90-264VAC 85% rated load current for 85-264VAC 100% rated load current for 110-370VDC Input Frequency: Specified: 47-63Hz, Nameplate: 50-60Hz No Load Input Power: <75mW @ 230VAC (EU CoC Tier 2 compliant) Inrush Current: 40A maximum, cold start @ 230VAC input Efficiency: DoE Level VI compliant, EU CoC Tier 2 compliant Output
Turn-on Delay: 1 second max. @ nominal line and full load Output Regulation ± 2% (measured at the output connector) Line Regulation: ± 1% (measured at the output connector, full load) Ripple: 1% Transient Response: 5% max. deviation (with 40-70% load step), 1ms typ. recovery time Hold-up Time: 100 ms / 230 VAC (typ) Power On Indicator: Green LED Protections
Input Protection: MOV transient suppressor, input line fusing Over-Voltage Protection: 110-130% of nominal output voltage Short-Circuit Protection: Auto-restart Over-Current Protection: 110-160% of rated output current (Current limit range is determined by normal output power rating, not derated power level) Environmental
MTBF: 1,500,000 hours @ 25°C ambient, full load (Telcordia SR-332, Issue 3) Operating Temperature: -20°C to 55°C (full load) See derating table for output power capability at other temperatures. Extended low temperature range available as a custom option. Storage Temperature: -30°C to 80°C Humidity: 0% to 95% relative humidity, non-condensing Altitude: 5000m Ingress protection: NA Cooling: Convection RoHS: Complies with EU 2011/65/EU amended by EU 2015/863 and China SJ/T 11363-2006 Safety
Dielectric Withstand Voltage: 4000VAC or 5656VDC from input to output 3000VAC or 4242VDC from input to earth (Class I models) Touch Current: Class I models: < 20uA Class II models: <75uA Earth Leakage Current: Class I models: <300uA Class II models: N/A Isolation Options: Floating output or Class I earthed output (desktop models) Earth Continuity Test: < 0.1 ohm between AC inlet earth pin and PCB termination point Means of Protection (Primary-to-Secondary): 2 x MOPP Compliant Standards: See listing at the end of this document. EMC
Applicable Standards: Medical: EN60601-1-2, 4th edition Emissions: EN55032, EN61000-6-3, EN61000-6-4 Immunity: EN55024, EN61000-6-1, EN61000-6-2 Conducted Emissions: Class B, FCC Part 15, Class B (with resistive load) Radiated Emissions: Class B, FCC Part 15, Class B (with resistive load) Harmonic Current Voltage Distortion: EN61000-3-2, Class A Voltage Fluctuations/Flicker: EN61000-3-3 Electrostatic Discharge (ESD) Immunity: EN61000-4-2, 8KV contact discharge, 20KV air discharge Radiated RF Immunity: EN61000-4-3, 10V/m 80-1000MHz, 3V/m 1-2.7GHz, 80% 1KHz AM EFT/Burst Immunity: EN61000-4-4, 4KV/100kHz. Line Surge Immunity: EN61000-4-5, 2KV differential, 4KV common-mode Conducted RF Immunity: EN61000-4-6, 3VRMS, 80% 1KHz AM Power Frequency Magnetic Field Immunity: EN61000-4-8, 30A/m Voltage Dip Immunity: EN61000-4-11 Enclosure
Housing: High impact plastic, 94V0 polycarbonate, non-vented AC Input Mechanical Options: Wall plug-in, changeable blades (Class II only) Desktop housing, extended housing: C6, C8, C14, or C18 IEC inlet (Class I or Class II) Markings: Label or laser printed Special Options Removal of LED (optional) Custom cord-sets (custom cord and/or connector types). Note: 5VDC USB power supplies with Micro-B or Type-C connectors have a voltage regulation specification of ±8% (4.6V to 5.4V). Custom markings Short term output surge capability Reduced leakage current versions (10uA max) for Type-CF medical applications and/or for AC noise sensitive equipment. (15W or less, 5 to 24V output voltage range.) Tightened output voltage tolerance Reduced output voltage ripple Improved reliability PCB laminate with plated-through-holes for IPC610 Class 2 compliance Custom housing colors Quasi constant-current output for SLA (lead-acid) battery charging applications Derating Curve Qty (ea.)/Carton 60 Individual Box/Gift Box Size (mm) Egg Crate Individual Box/Gift Box Color white Master Carton Size (mm) 480 x 450 x 205 Gross Weight (kg) 15.2 Label Width (mm) 29.8 Label Height (mm) 20.8 Input Configuration Description Output Configuration Common output connector options: Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design
For a comprehensive list of options,
Contact GlobTek for your specific requirements or custom solutions.
Popular Products (Stock items)
SKU Volts Out Current Out (Amps) Connector RFQ Sample Request 2185153 4.5 2.2 RFQ Sample Request What is Level VI Efficiency?
The numerals I to VI are an International Efficiency Marking Protocol which allows manufacturers to designate the efficiency performance of a product. This performance is based on the measurement of the operating energy efficiency and no-load power consumption of external power supplies or AC DC adapters tested at different load levels. The no-load power consumption refers to the amount of power that an external power supply draws even when the application is turned off or disconnected.
Is Level VI Efficiency required?
Level VI efficiency is mandated in certain countries and regions for certain products or certain applications.
What is the Eco-design Directive 2009/125/EC?
The Eco-design directive put into law in Europe the latest requirements for energy efficiency and conservation for AC DC adapters and external power supplies.
What is a Plug-in AC-DC Adapter?
Plug in AC-DC adapters are also known as AC Adaptors or AC-DC converters and are a type of external power supply. Some electrical appliances require power but lack the internal components to derive the required voltage and power from mains power. This is where an AC adapter is used to convert the AC current into DC voltage
How Does an AC-DC Adapter Work?
The AC to DC adapter or external power supply consists of a power supply which is enclosed in a housing similar to an AC plug, hence the term plug type, wall plug in, plug-in or plugtop power adapter. The power supply is plugged into the mains socket and the AC Voltage is then converted by the AC to DC adapter power supply into a DC voltage that is fed into the appliance via the output cable connection.